마이랩

물성측정장비

Physical property measurement equipment

The Polyken™ Probe Tack from ChemInstruments makes it easy to measure the tack of pressure sensitive adhesives. A precision ground 5.0 mm diameter flat probe contacts the adhesive, reverses direction and pulls away from the adhesive. The maximum force required to break the adhesive bond is recorded and displayed. The Polyken™ Probe Tack adhesive testing machine meets the standards set forth in ASTM D2979. Machine speed is 24 ipm (61 cm/m), probe diameter is 5 mm and it has an annular ring which applies the standard pressure of 9.79 +/-0.10 kPa. An automatic test cycle produces a 1 second dwell time from the beginning of contact to the end of contact.

Machine Details

Rugged construction, capable of withstanding the abuse of the production environment
Digital speed and distance control
Automated test sequence
Test Methods – D2979 or custom test methods
D2979 test method speed is 24 ipm (10 mm/sec) with a 1 second dwell time
Selectable speed range from 6 to 30 ipm (2 - 12 mm/sec) for custom test methods. Increment value is 1 ipm or 1 mm/sec.
Selectable dwell time from 1 to 30 seconds (in increments of 1 second) for custom test methods
5 pound load cell is included with the machine (2 and 10 pound load cells are optional)
Accurate to ± 0.1% of load cell range
Capable of pulling up to 5 pounds (2.2 Kg)
Operating temperature range 32° - 150° F (0° - 70° C)
Capable of stand-alone operation with integrated touch display
Data can be downloaded to EZ Data software for complete data management
5.7 inch touch screen display
Universal input voltage from 85-265 VAC(50/60Hz)

Data Acquisition System

The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it and also stores that data in its memory.
Samples at 2000Hz, 2 samples are collected, averaged and stored as a data point. A test will generate a data point every 1ms
Displays a graph of all measured force values upon completion of a test
Displays the high and low measured force results immediately upon completion of a test
Export data by USB connection to a local PC with our EZ Data software
Displays test values in grams, kilograms, ounces, pounds or Newtons

EZ-Data

EZ Data Compatible Remote setup, operational control and enhanced data collection are all possible when coupled with our EZ Data management software. This application requires an external PC. (See more information about the EZ-Data product)

Calibration Service

Calibration Service is available for this equipment. Contact us for more information.
Load cell is easily removable for yearly calibration.

PT-2000 Equipment Manual

이용약관 | 개인정보처리방침